Industrial plant up to standard

The modern production mode puts forward new requirements for the factory environment of industrial production, and the increasing production process requirements are more sensitive to the temperature and humidity in the factory. Regardless of the process conditions, the humidity in the plant is too high, which leads to the damp of the production equipment and seriously affects the production progress and delivery rate. And the relative humidity of the environment is more than 60%, the mold can grow, humidity is more than 85% is the high incidence of mold environment. Let's take a look at the effect of the conventional dehumidification scheme? Many manufacturers choose traditional desiccant for dehumidification, but the effect is not satisfactory; On the other hand, the desiccant still needs to be constantly updated, or it will cause a waste of labor, and repetition undoubtedly increases the investment of funds. So more and more factories began to think about how to use a simple way of dehumidification, might as well take a look at the industrial dehumidifier.

                     1、 Applicable place

  Industrial dehumidifier is not only suitable for modern production workshop, but also necessary for the following places with high temperature and humidity requirements:

1. Archives, reference rooms, libraries, museums, warehouses and other places for storing materials;

2. Drying and dehumidification or storage of raw materials, semi-finished products and finished products in food, power distribution, chemical industry, aquatic products, agricultural and sideline products, printing, medicinal materials, wood, household, paper making and other industries;

3. Manufacturers of health care products.

  2、 Characteristics

1. The dehumidification area is set at 80-1600 square meters according to different plant sizes and various models;

2. With air temperature and humidity freely set, and automatic control, realize full automation, once set, worry free;

3. It can switch on and off regularly, and can be set arbitrarily from 1 to 24 hours;

4. With automatic fault detection function, if there is a fault, it will automatically detect and display the corresponding fault code, which is convenient for maintenance;

5. Good compressor with strong power and good dehumidification;

6. The machine is suitable for low temperature environment and automatic frosting. The applicable temperature is 5-38 ℃.

  3、 Working principle of dehumidifier

  The dehumidifier is composed of compressor, air conditioner, fan, water tank, casing and controller. Firstly, the fan sucks the moist air into the evaporator and lowers the surface of the evaporator below the dew point of the air through the refrigeration system of the compressor. At this time, when the moist air passes through the evaporator, the water in the air will be decomposed and attached to the surface of the evaporator, and the water will flow along the hydrophilic foil on the evaporator to the water tray, and then to the water tank or drain pipe for discharge, The dehumidified dry cold air is heated by the condenser and discharged out of the machine, so that the indoor humidity is reduced.